Home> Products> can cause respiratory tract irritation

{ "products": [ { "_id": "63ae9677df88490001942088", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Accelerators - Cobalt 6%", "description": "Cobalt 6% is an abbreviation for the compounds cobalt napthenate and cobalt octoate, usually supplied as a 6% solution. These compounds are promoters used in the curing of polyester and vinyl ester resins with methyl ethyl ketone peroxide (MEKP) type catalysts. Promoters are also called accelerators. They can be added to the resin by the supplier, in which case the resin is said to be pre-promoted. Alternatively, promoters can be added by the manufacturer prior to adding catalyst to the resin.\nThe purpose of cobalt-based promoters is to speed up the curing reaction of polyester and vinyl ester resins and allow them to cure at room temperature. The cobalt-based promoter helps the catalyst to start the chemical reaction between the resin and styrene monomer and form a cured solid.\n\nOther types of promoters are available, including dimethylanaline (DMA). A combination of DMA and cobalt promoters can be used in conjunction with MEKP to give fast cure of polyester resins.\n\nThe exact amount of promoter added to the resin will depend on the resin used, the temperature in the workshop and the gel time desired. Usually 0.1 to 1% (based on the mass of resin) of cobalt 6% type promoter is added. Promoters must never be mixed directly with catalyst since a violent explosive reaction results. This is why it is important to ensure all promoters are thoroughly mixed with the resin before adding the catalyst.\n\nCobalt based promoters can be identified by their deep purple colour. Health hazards are associated with the cobalt compounds as well as the solvent (e.g. naptha) that they are dissolved in. Cobalt 6% can cause irritation of skin and eyes. It can also be toxic and is flammable.\n\nSpecial Protection Information\nRespiratory Protection: Adequate ventilation should be provided. If above NOHSC exposure standard level, use SA approved respiratory protective equipment.\nEye Protection: Use SA approved chemical splash goggles.\nProtective Clothing: Wear chemical resistant gloves, such as butyl rubber or neoprene rubber gloves. Apply barrier creams to uncovered skin. Wear full length trousers, long sleeved shirts and safety boots.\nCONSULT SAFETY EQUIPMENT SUPPLIERS FOR RECOMMENDATIONS.\n\nEffects of Exposure\nEyes: Can cause irritation.\nInhalation: Can cause respiratory tract irritation. Can cause headaches and uncoordination.\nSkin: Can cause irritation and dermatitis.\nSwallowing: Can cause stomach and bowel irritation, vomiting and depression. Aspiration of material can cause potentially fatal damage to the lungs.\n\nFirst Aid Procedures\nEyes: Flush with water for at least 15 minutes.\nInhalation: Remove to fresh air. If breathing is difficult, seek immediate medical assistance.\nSkin: Wash with soap and water.\nSwallowing: Do NOT induce vomiting. If person is conscious, they should drink large quantities of water. Seek medical advice immediately.\n\nSpill or Leak Procedures\nEliminate all sources of ignition and ventilate area. Wearing protective equipment, stop spill at source, dam area and, if possible pump liquid into salvage tank. Alternatively, absorb spill with vermiculite or sand. Scoop up into labelled waste containers. Dispose of waste in accordance with local, state and federal regulations. Seek advice from supplier. Reporting of leaks/spills may be required under EPA and Dangerous Goods regulations.\n\nFire Extinguishing Procedures\nWear self-contained breathing apparatus and protective clothing. Use foam, dry chemical or carbon dioxide to put out fires. Cool fire exposed containers with water spray.\n\nStorage and Handling Procedures\nDG Class 3 (Flammable liquid). Keep away from heat, flame and strong oxidants. Store in closed, labelled containers in a well ventilated area. Store away from sources of ignition. Provide both floor level and breathing zone ventilation.", "price": 450.0, "discountamount": 100.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "cobalt promoters", "Can cause headaches", "Can cause irritation", "respiratory protective", "neoprene rubber gloves", "seek immediate medical", "labelled waste containers", "Wear full length trousers", "SAFETY EQUIPMENT SUPPLIERS", "compounds cobalt napthenate", "Wearing protective equipment", "NOHSC exposure standard level", "Wear chemical resistant gloves", "violent explosive reaction results", "Can cause respiratory tract irritation" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 2, "imageuri": "https://productimages.withfloats.com/actual/63ae9679a8fd2d00010b469c.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/63ae9679a8fd2d00010b469c.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-12-30T07:42:47.444Z", "updatedon": "2022-12-30T07:42:47.444Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/accelerators-cobalt-6-/2", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Jay Enterprises ", "category": "Hardener", "tags": [ "Cobalt", "6%", "MEKP", "Acceleator", "Resin", "Fiber Resin", "Resin supplyer", "Polyethylen", "Ethyl Ketone", "Cobalt-based Liquid", "dimethylanaline", "DMA", "Cobalt Promoters", "With MEKP", "Fast Curing", "Polyester Resin", "Hardness", "Mixing Hardness", "Blue Colour Hardner", "Cobalt Compounds", "Liquid", "Hardner liquid", "Fiber hardner", "Fast drying hardner" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63aea901df88490001942201", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Catlyst - MEKP ", "description": "MEKP (Methyl Ethyl Ketone Peroxide) is the catalyst added to polyester resins and vinyl ester resins. As the catalyst mixes with the resin, a chemical reaction occurs, creating heat which cures (hardens) the resin. Use approximately 1/2 oz per quart of resin. We recommend the use of our MEKP Catalyst Dispenser for accurate measuring and pouring of the catalyst. \n\nMEKP is principally used as an initiator or catalyst for the room temperature cure of unsaturated polyester and vinyl ester resins. It is also needed with all gel coats. It is typically used between 1.25% to 1.75% (1 2/3 ounce to 2 1/3 ounces per gallon).\n\nDirections for Using MEKP Catalyst\nMEKP stands for Methyl Ethyl Ketone Peroxide and is for use with polyester resins. This is a very dangerous material.\nSafety *\nCatalyst is very corrosive and thus is a prohibited airfreight or postage item. It is also highly inflammable. Both heat and sunlight affect\nit and incorrect storage can render it useless. Ideally it should be stored under refrigeration. It has an attraction for milk food products\nand needs to be very well sealed or placed in a refrigerator that doesn’t house food stuffs. We have found that it doesn’t contaminate\nstubbies or cans!!\nWhen mixing MEKP with resin, take care as a violent mixing action can splash it out of the mixing container. Use a measuring cup\nrather than a syringe as it can be shot into the container and bounce back into the eyes. Mix thoroughly and methodically into the resin\notherwise some portions of resin may not be catalysed and thus not cure properly.\n\nKeep out of reach of children and if they are to use it, make sure they are instructed in its use and are properly supervised.\nThese days, most resins you use will be pre accelerated or have accelerator added, usually of the cobalt variety (a purple liquid.) Should\nyou be adding cobalt accelerator, it must be thoroughly dispersed in the resin prior to adding the catalyst. The accidental mixing of\ncobalt accelerator with MEKP will result in a violent reaction =BANG!\nFirst Aid*\nMEKP attacks eyes-Protect eyes while using. If splashed into the eyes immediately flood with water for 15 minutes and seek medical\nadvice. This is very important as permanent blindness can result within 15 seconds.\nIf swallowed do not induce vomiting, give glass of water and seek medical advice\nAvoid skin contact-Wear protective clothing. If skin contact does occur, remove all contaminated clothing and wash skin thoroughly.\nSeek medical advice\nHow much to use?\nWe usually express this in terms of percentage ie:1% catalyst to resin = 10ml of catalyst to 1kg of resin. A rule of thumb for polyester\nlaminating resin is between 1% and 2% i.e. 1% for summer (to give maximum wetting time) and 2% for winter.\nFor polyester Gelcoats used in a moulding situation, we recommend from 2% to 2.5%catalyst. The reason for this is that if the gelcoat\nis under cured, the backup laminating resin will bite into the gelcoat and cause wrinkling or puckering. If the gelcoat is to be used as a\nfinish over a laminate, the 1% to 2% rule applies. The addition of 4 % styrene wax in the final coat, will give it a harder, less tacky\nfinish.\nYou will have noted by now that we are measuring resin by weight-the reason is that it is the easiest way to be accurate. With polyester\nresin, kitchen scales will suffice. (Scales can always be put in a clear plastic bag, this keeps you out of trouble with the cook!) There\nreally is NO substitute for using the weigh method.\n\n\n", "price": 350.0, "discountamount": 100.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "catalyst mixes", "polyester resins", "violent reaction", "house food stuffs", "polyester Gelcoats", "vinyl ester resins", "cobalt accelerator", "protective clothing", "permanent blindness", "unsaturated polyester", "room temperature cure", "violent mixing action", "MEKP Catalyst Dispenser", "give maximum wetting time", "Methyl Ethyl Ketone Peroxide" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 3, "imageuri": "https://productimages.withfloats.com/actual/63aea903a8fd2d00010b66cc.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/63aea903a8fd2d00010b66cc.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-12-30T09:01:53.88Z", "updatedon": "2022-12-30T09:01:53.88Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/catlyst-mekp-/3", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "JayEnterprises", "category": "Fiber Hardener", "tags": [ "MEKP", "Catalyst", "Resin", "Hardness", "Resin Hardner", "Fiber Resin", "Polyester Resin", "Ketone", "MEKP hardner", "Mixing Hardness", "Catalysed", "Curu Properly", "Mixing Rato", "Pot-life", "Cure", "Speed dry", "Pot-life 3month", "RT", "Room Temprature", "Curuing Fast", "How to use catalyst", "Quantity mixing ratio of MEKP", "Catlyst to gelcoat", "Fiberglass Work", "Fiber Hardner", "Fiber Mekep", "Mekp and cobalt", "Cobalt and Catlyst", "Mekp and 6%" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6565bee33ddfea1a58dcaccc", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Mould Release Liquid ,Silicone Mould, Epoxy , Etc.", "description": "MOULD RELEASING LIQUID .\n*silicone mould releasing liquid , easy to remove mould by applying \nbefore pouring liquid.\nSilicone rubber mold release liquid can be applied as a spray or with a brush. For spraying, you can use a nozzle that creates a fine fog and make a single pass across the surface. If brushing is used, you can break surface tension and minimize air entrapment by applying the release agent with a soft brush. You can then apply another light mist coating and let it stand for five minutes before applying mold rubber. \nYou can dilute the mold release with water to create an active content of 0.5–2%. In some cases, a higher concentration may be preferable. Avoid applying too much mold release, as this can cause surface irregularities and poor welds. \nSilicone release agents can be used in a wide range of applications, including:\nImproving product quality\nImproving work efficiency\nReleasing during the molding of rubber, plastic, and metal parts\nReleasing during the molding of food packaging containers\nGlossing\nSurface protection\nLubrication \nSilicone rubber is used in many applications, including:\nBuilding construction and infrastructure\nConsumer goods and appliances\nFood and beverage\nMobility\nPower water and telecommunications\nTextiles, leather, and nonwovens ", "price": 500.0, "discountamount": 250.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Etc.", "Epoxy", "LIQUID", "Mould Release", "Silicone Mould" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 142, "imageuri": "https://productimages.withfloats.com/actual/6565beea820f6e498dcff038.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/6565beea820f6e498dcff038.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-11-28T10:20:19.881Z", "updatedon": "2024-04-05T12:49:07.182Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/mould-release-liquid-silicone-mould-epoxy-etc-/142", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "silozcest", "category": "Mould Release Liquid ,Silicone Mould, Epoxy , Etc", "tags": [ "Release agent", "Wax release agent", "silicone mould release agents", "liquidsilicone mould release" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "647058641a6be80001a8b42d", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "SILOCZEST Silicone Mold Making Kit,25A Liquid Silicone Rubber,1:1 Mixing Ratio|Jelly Tray,Artificial Jewelry,Cement Statues Mold Making|Translucent(500GM+500GM)", "description": "LIQUID SILICONE RUBBER (LSR)\nLSR is designed for injection molding and is almost always medical grade. This is delivered to us in either two sealed drums or 40 lb buckets. One drum/bucket has a catalyst, the other has the crosslinker.\n\nThe advantage of LSR is that it’s pumped directly from the drum/bucket into the molding machine with little to no possibility of modifying the material. The exception to this is if you add a colorant. For this reason, most medical parts are LSR.\n\nHIGH CONSISTENCY RUBBER (HCR)\nHCR is premixed and has a playdough-like texture. High Consistency Rubber starts with a “base stock” of silicone. Then, a catalyst and fillers/additives are added on a two-roll mill. After this, HCR is brought to the compression molding press to make parts or extruder to make tubes. HCR can be a platinum, peroxide, or tin cure system, see below for more info on cure systems\n\nHCR has the advantage of being able to mix in different additives or fillers to change its physical characteristics. This can also be a disadvantage if the additive and filler amounts and ingredients are not shared with the end-user. It is also tempting for manufacturers to use extra filler — filler is much cheaper than food safe silicone rubber — to make more parts with the same amount of silicone base material.\n\nHIGH TEMP SILICONE CURING\nThere are different ways to “cure” silicone rubber. Curing is a chemical process during which the material transitions from a liquid or gel to a solid. It typically occurs when the material is exposed to oxygen, though there are different ways to accelerate the process.\n\nThere are several different catalysts that a manufacturer can add. Liquid silicone rubber and HCR cure quickly when exposed to high heat (350F +/- 60F). At room temperature, it may take days for LSR or weeks for HCR to cure.\n\nThat isn’t ideal for most manufacturers or product lines. With that in mind, most use a curing system. The following are the three most common you’ll encounter.\n\nPLATINUM SILICONE\nLSR is almost always platinum-catalyzed. However, properly molded platinum menstrual cups do not need to be post cured. Platinum cured LSR is generally medical grade silicone and what we use at Casco Bay Molding.\n\nPEROXIDE\nA good deal of HCR silicone is peroxide cured and used for extrusion, transfer, or compression molding. Peroxide cured HCR needs to be post-baked in order to remove the volatiles. This can be a time-consuming and expensive step.\n\nIf a company tries to cut costs by shortcutting the necessary post-bake step, volatiles can remain in the material. Peroxide cure systems are generally much less expensive than platinum systems but require a time-consuming post-bake.\n\nCasco Bay Molding does not do extrusion or compression molding. Our expertise lies in medical grade silicone production and design, for which injection molding is most suitable.\n\nTIN CONDENSATION CURE SYSTEMS\nThe third type of curing system, tin condensation is not recommended for healthcare or medical applications. This is because the tin (Sn) remains in the compound after curing. ", "price": 3000.0, "discountamount": 1650.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Sn", "LSR", "gel", "days", "mind", "info", "order", "tubes", "three", "costs", "weeks", "solid", "reason", "little", "oxygen", "design", "company", "texture", "colorant", "extruder", "compound", "end-user", "transfer", "high heat", "extrusion", "playdough", "volatiles", "exception", "expertise", "advantage", "good deal", "base stock", "third type", "healthcare", "possibility", "same amount", "crosslinker", "ingredients", "extra filler", "HCR silicone", "product lines", "curing system", "two-roll mill", "40 lb buckets", "time-consuming", "filler amounts", "expensive step", "different ways", "tin cure system", "molding machine", "One drum/bucket", "platinum systems", "two sealed drums", "tin condensation", "room temperature", "chemical process", "injection molding", "fillers/additives", "PLATINUM SILICONE", "Casco Bay Molding", "most manufacturers", "most medical parts", "Skin liquid Rubber", "different additives", "medical applications", "Peroxide cure systems", "LIQUID SILICONE RUBBER", "silicone base material", "platinum menstrual cups", "HIGH CONSISTENCY RUBBER", "necessary post-bake step", "physical characteristics", "compression molding press", "HIGH TEMP SILICONE CURING", "CONDENSATION CURE SYSTEMS", "food safe silicone rubber", "several different catalysts", "medical grade silicone production" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 34, "imageuri": "https://productimages.withfloats.com/actual/6470588d437d860001ed1177.png", "tileimageuri": "https://productimages.withfloats.com/tile/6470588d437d860001ed1177.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-05-26T06:57:40.924Z", "updatedon": "2023-08-01T11:42:35.825Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/siloczest-silicone-mold-making-kit-25a-liquid-silicone-rubber-1-1-mixing-ratio-jelly-tray-artificial-jewelry-cement-statues-mold-making-translucent-500gm-500gm-/34", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": -1, "uniquepaymenturl": null, "brandname": "SILOCZEST", "category": "LiquidSiliconRubberMold", "tags": [ "Liquid Silicon Rubber", "Skin Pigment", "Medical Grade", "Medical Molds", "Liquid rubber", "RTV SILICONE RUBBER" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "64c252c8b34a33ff876b4206", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63d3bcb2f02ad50001838f02", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Liquid Silicon Molds ", "description": "First Try Flying Bird Silicone Mold, Swallow and Peace Dove Soap Mold, Making Cake, Decoration, Chocolate, Polymer Clay, Cupcake Decor, Sugar Craft, Resin Clay Molding Baking \n\nAbout this item\nFOOD-GRADE MATERIALS – Our 3D mold completely BPA free, non-toxic and harmless. Heat resistance can reach 446 degrees fahrenheit, cold resistance can reach -40 degrees fahrenheit. 100% Safe to use, microwave safe, oven safe, and dishwasher safe.\nUNLIKE OTHER SILICONE MOLDS – Our candy ice cube molds are made out of Food-Grade Silicone! It is the highest standard in silicone, Don't be fooled by low cost alternatives which are filled with nasty fillers! Make sure your friends get the best!\nMULTIPLE USE - Silicone Baking Molds is ideal for use with a wide range of edible and non edible materials; can be used as cake or cupcake decoration, candy melts, Ice Cube, decor and embeds for handmade soap, candle accents, and for clay and epoxy resin jewelry.\nNON-STICK DESIGN – Simply pour your favorite ingredients in the mold, prepare, and cool completely. Compared with conventional stiff cube molds, our silicone trays are real easy to release ices. Because it is softer, you only need to push the bottom of the molds, and then the ice cubes and balls get out easily.\nNICE GIFT - They are DIY cake baking molds, you can have a good time with your family or friends and get a caking skill by making fondant, candy or decorating cake together; That is a nice gift for friends and family\n\nProduct description\nYou can using this DIY mold making yourself delicious pastry, cakes, cake decorations, candies, ice cream, candles, soaps, biscuits during Thanksgiving day, Christmas, birthday or family dinner.\n\nFeature: Temperature resistance wide range. It can be used within between -40?~230?, suitable for microwave oven, oven, refrigerator.\n\nDove Shape Mold Candy Chocolate Cake Decorating Molds\n- This mold is well made and detailed.\n- Soft and easy to handle for the beginners.\n- Reusable & durable, have a relatively long life cycle.\n- This silicone molds makes your baking more novel, not like former cupcake baking mold which is unchangeable in the pattern.\n\nTips:\n- NO direct contact with open fire.\n- Forbid a stronger impact force and scratching with sharp items.\n- Store it in a dry place instead of wet environment, protected from sunlight.\n- Do not use sharp or abrasive objects to wash it ( steel wool, for example).", "price": 100.0, "discountamount": 50.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Tips", "ices", "soaps", "balls", "cakes", "embeds", "bottom", "example", "Swallow", "friends", "3D mold", "fondant", "candles", "Feature", "pattern", "candies", "sunlight", "biscuits", "DIY mold", "birthday", "Christmas", "beginners", "dry place", "open fire", "good time", "ice cream", "NICE GIFT", "ice cubes", "dishwasher", "steel wool", "sharp items", "Sugar Craft", "candy melts", "refrigerator", "MULTIPLE USE", "caking skill", "Polymer Clay", "handmade soap", "Cupcake Decor", "family dinner", "nasty fillers", "microwave oven", "direct contact", "candle accents", "silicone trays", "long life cycle", "cold resistance", "Heat resistance", "wet environment", "abrasive objects", "cake decorations", "Thanksgiving day", "edible materials", "highest standard", "delicious pastry", "NON-STICK DESIGN", "epoxy resin jewelry", "Food-Grade Silicone", "Product description", "FOOD-GRADE MATERIALS", "Liquid Silicon Molds", "Peace Dove Soap Mold", "favorite ingredients", "candy ice cube molds", "stronger impact force", "low cost alternatives", "Silicone Baking Molds", "DIY cake baking molds", "446 degrees fahrenheit", "Resin Clay Molding Baking", "former cupcake baking mold", "UNLIKE OTHER SILICONE MOLDS", "conventional stiff cube molds", "Temperature resistance wide range", "First Try Flying Bird Silicone Mold", "Dove Shape Mold Candy Chocolate Cake Decorating Molds" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 18, "imageuri": "https://productimages.withfloats.com/actual/63d3bcb57c22d30001ab28c3.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/63d3bcb57c22d30001ab28c3.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-27T11:59:46.048Z", "updatedon": "2023-10-12T11:47:49.351Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/liquid-silicon-molds-/18", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "", "tags": [ "Epoxy Mold", "Ready", "Mold", "Ready Mold", "Silicon rubber" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63c8fc6a6962c00001584d79", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Transparent Liquid Silicon rubber with Epoxy Art Work ", "description": "Transparent Liquid Silicon rubber with Epoxy Art Work \n\nHow To Apply ArtResin\nMix together equal parts from each bottle, stirring for 3 minutes. Then just pour the liquid mixture over your project and spread.\n\nLeave it to dry for 24 hours and then love it forever!\n\nMEASURE\nWith gloves on, pour equal amounts of resin and hardener into a mixing cup. You can refer to our resin coverage calculator to determine how much you'll need, but just for quick reference, the 32 oz Starter Kit covers 8 sq. ft., the 1 gal Studio kit covers 32 sq. ft. and the 2 gal Professional Kit covers 64 sq. ft.\n\nTIP - Mix up a little more than you think you’ll need because you want to completely cover your work in one shot and not have to mix more later.\n\nMIX\nStir really well for at least 3 minutes. Scrape the sides and the bottom to make sure you’re being thorough (unmixed material will leave you with sticky spots that just won’t cure). Once you put the resin and hardener together, you’ll have about 45 minutes of working time before the resin thickens and cures.\n\nPOUR\nAfter making sure your piece is level, go ahead and pour ArtResin® over your work. Don’t be scared! It’ll start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You’ll notice bubbles will begin to rise to the surface. Many of these will pop on their own, but you can also pop them yourself for a flawless finish—our Artist's Torch works great for this (see our how-to videos for more info).\n\nTIP - Wooden panels work best for large pieces rather than canvas because they won’t sag under the weight of the resin.\n\nWAIT\nArtResin needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.\n\nCLEAN UP - To reuse your mixing tools, wipe them down with a paper towel before the resin dries. \n\nFor More Information Jay Enterprises Bangalore / Karnataka.\nPH : 8050657801 /8884343524 . \n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "PH", "TIP", "8 sq", "WAIT", "32 sq", "64 sq", "sides", "place", "edges", "brush", "cures", "Torch", "touch", "Artist", "bottom", "videos", "canvas", "weight", "gloves", "bottle", "surface", "MEASURE", "project", "bubbles", "8 hours", "12 hours", "ArtResin", "72 hours", "one shot", "24 hours", "Karnataka", "3 minutes", "mixing cup", "45 minutes", "equal parts", "resin dries", "paper towel", "second coat", "sticky spots", "working time", "large pieces", "mixing tools", "Wooden panels", "equal amounts", "several hours", "liquid mixture", "Epoxy Art Work", "flawless finish", "dust-free space", "quick reference", "1 gal Studio kit", "unmixed material", "32 oz Starter Kit", "2 gal Professional Kit", "resin coverage calculator", "Transparent Liquid Silicon rubber", "More Information Jay Enterprises Bangalore" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 14, "imageuri": "https://productimages.withfloats.com/actual/63c8fc6dba77fa0001df760b.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/63c8fc6dba77fa0001df760b.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-19T08:16:42.366Z", "updatedon": "2023-01-19T08:16:42.366Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/transparent-liquid-silicon-rubber-with-epoxy-art-work-/14", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "JayEnterprises", "category": "Transparent Liquid Silicon rubber & Epoxy Art Work", "tags": [ "Epoxy", "Liquid Silicon rubber.", "Transparent Liquid Silicon rubber with Epoxy Art W", "Transparent Liquid Silicon rubber with Epoxy Art W" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63c4eb16d59c0b0001322261", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Art Epoxy Resin ", "description": "Our Epoxy Resin Art Resin is Crystal Clear and formulated by Artists for artists to perform well with different types of additives, over different types of materials, etc. Epoxy Resin And Hardener For Floors Epoxy resin systems consist of two parts, an “A” and a “B” side. The B side, also known as the “hardener”, is the epoxy curing agent; Epoxy is used to coat a surface and art resin is typically used to fill a void. Epoxy resin cures and dries a lot quicker than deep-pour resin because of the density at which it is used. The two cannot be used interchangeably as they will not cure correctly if used for the others applications. We carry a wide variety of resin art kits, tools, and accessories to help. Grab Now. Silicone Epoxy Resin Molds - Tray Handle Resin Casting Mold . High quality art products. Order in bulk now. Available at best prices.\n\nFor More Details Contact \nJay Enterprises Bangalore \nPh : 8050657801 /8884343524 ", "price": 799.0, "discountamount": 100.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "accessories", "wide variety", "Crystal Clear", "Art Epoxy Resin", "different types", "Details Contact", "Epoxy resin cures", "epoxy curing agent", "others applications", "Epoxy Resin Art Resin", "Enterprises Bangalore", "High quality art products", "Silicone Epoxy Resin Molds", "Floors Epoxy resin systems", "Tray Handle Resin Casting Mold" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 12, "imageuri": "https://productimages.withfloats.com/actual/63c4eb18ae9ce00001ee8fe0.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/63c4eb18ae9ce00001ee8fe0.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-16T06:13:42.561Z", "updatedon": "2023-01-16T06:13:42.561Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/art-epoxy-resin-/12", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Jay Enterprises ", "category": "EpoxyResin", "tags": [ "Epoxy Resin", "aRT", "art epoxy", "resin", "Transperent" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63b79c3170a42300016a4ca9", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "ISO Resin ", "description": "ISO Resin\nISO Resin is a medium viscosity, medium reactive polyester resin based on Isophthalic acid and superior glycols. It exhibits good mechanical and electrical properties together with good chemical resistance compared to general-purpose resins.\n\n Download Now\nProduct Features & Benefits:\nISO Resin is a medium viscosity, medium reactive polyester resin based on Isophthalic acid and superior glycols. It exhibits good mechanical and electrical properties together with good chemical resistance compared to general-purpose resins.\nISO rapidly wets the surface of glass fiber in the form of cloth mat or chopped fiber to produce laminates and moldings. Its superior chemicals resistance towards most mineral and organic acids, solvents and oils make an ideal choice for making glass reinforced chemical process equipment, storage tanks, tankers, ducting, hoods etc. for handling chemicals at ambient temperature. Moulds, boats, and bathtubs etc can also be made\n\nTypical Applications:\nChemical Tanks/Pipelines\nFume extractor\nDuct\nHood\nChemical equipment\nTanker\nBoat\n\n* Using Accelerator, Co (2%) 1 ml, Catalyst, MEKP1.5ml, the gel time, cure time and Peak Exotherm measured.\n* Summer ω Winter [TM - Test Method as per ISO-9001-2000-DOC-REV-03]\n* Post cured Result\n\nUsage:\nChemical Resistance:\nUnreinforced castings show a commendable degree of resistance to most inorganic and organic acids at ambient temperature, with the exception of strong oxidizing acids. It also resists oils, plasticizers and inorganic salt solutions. Strong acids and alkalis attack For specific application please contact our technical services department. In boiling water orthophthalate resin showed signs of disintegration within 40 hours, whereas showed no disintegration even after 60 hours. In 10% sulfuric acid and 5% aqueous caustic soda showed much superior resistance compared to general-purpose orthophthalate resin. In the latter reagent specimens of orthophthalate resin disintegrated within an hour.\nPost Curing:\nIt is recommended to mature the products for 24 hours and post curing should be done for minimum of five hours at 800C, or 2-3 weeks at room temperature. This is essential for getting the optimum properties.\n\nStorage / Handling:\nThe polyester resin remains stable for 3 months at 300C in the dark and 4 months at 250C. The resin stability deteriorates markedly at elevated temperature, especially when exposed to direct sunlight. ISO Resin has a flash point of 340C and is classified as flammable. \"NO SMOKING \" rules should be strictly followed. In case of spillage, use sand or earth to absorb and shovel off for disposal as per local regulations, In case of fire, use dry chemical foam, Carbon dioxide or water spray to extinguish the flame.\n\nPacking:\nThe Polyester resin is packed in HDPE carboys ( 30, 35, 40 & 45 kgs ) and epoxy coated steel drums HDPE barrels\n(220 kgs) of standard size net weight. Special packing size offered for projects on returnable containers. Technical services are also provided to comply standards.\n\nHealth & Safety:\nNever add metal salts (Accelerator) or Pre Acceleratorated resin to Peroxides when adding peroxides to a resin solution, mix thoroughly the resulting product Do not add organic peroxides to a hot diluents or process. Prevent contamination of Accelerator, promoter from materials like ( Iron Copper, Cobalt ) salts, storing acids and sanding dusts. Suggested containers are glass, polypropylene, Teflon, Poly-ethylene or stainless steel to prevent contamination of material during its handling.", "price": 160.0, "discountamount": 20.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "resin stability", "use dry chemical foam", "electrical properties", "strong oxidizing acids", "good chemical resistance", "much superior resistance", "exhibits good mechanical", "inorganic salt solutions", "Pre Acceleratorated resin", "water orthophthalate resin", "chemical process equipment", "specific application please", "superior chemicals resistance", "technical services department", "medium reactive polyester resin" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 9, "imageuri": "https://productimages.withfloats.com/actual/63b79c32d6b95400015b8990.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/63b79c32d6b95400015b8990.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-06T03:57:37.359Z", "updatedon": "2023-01-06T03:57:37.359Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/iso-resin-/9", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Jay Enterprises", "category": "FiberResin", "tags": [ "ISO Resin", "iso", "resin iso", "fiber resin", "hardner", "fiberglass mat" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63b6e885d242020001fec55f", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Gp Resin ", "description": "The general purpose polyester resin is a quick curing unsaturated polyester resin based on Orthophthalic raw material for laminating purpose. It is un-accelerated. Suitable for both hand lay up and gun spray up. The resin offers excellent mechanical properties, impact and water resistance. The glassfibre laminate made with this resin has excellent mechanical strength, good rigidity and outstanding durability.\n\nTypical Applications ( General Purpose Resin ):\nAutomobile Components\nFlower pot\nSports Equipments\nSafety Helmet\nDust Bin\nWater Tank\nGarden Furniture\nBath Tub\nContainer\nPanels\nMachine Cover\nStatues\n\nAddition Chemical Needed\n* Using Accelerator, Co (2%) 1 ml, Catalyst, MEKP1.5ml, the gel time, cure time and Peak Exotherm measured.\n\nUsage:\nThe general purpose polyster resins performs best if the laminate is completely post cured. The quantity of catalyst and accelerator can be adjusted to get a shorter or longer gel time. The accelerator must be completely mixed before catalyst is added in order to avoid a direct blending which may cause an explosion.\n\nPost Curing:\nIt is recommended to mature the products for 24 hours and post curing should be done for minimum of three hours at 800C, or 2-3 weeks at room temperature. This is essential for getting the optimum properties.\n\nStorage / Handling:\nThe polyester resin remains stable for 3 months at 300C in the dark and 4 months at 250C. The resin stability deteriorates markedly at elevated temperature, especially when exposed to direct sunlight. espol 12.00 has a flash point of 340C and is classified as flammable. \"NO SMOKING \" rules should be strictly followed. In case of spillage, use sand or earth to absorb and shovel off for disposal as per local regulations, In case of fire, use dry chemical foam, Carbon dioxide or water spray to extinguish the flame.\n* Summer Winter [TM - Test Method as per ISO-9001-2000-DOC-REV-03]", "price": 150.0, "discountamount": 20.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "resin stability", "water resistance", "Using Accelerator", "local regulations", "glassfibre laminate", "elevated temperature", "use dry chemical foam", "General Purpose Resin", "general purpose polyster", "Orthophthalic raw material", "unsaturated polyester resin", "excellent mechanical strength", "general purpose polyester resin", "resin offers excellent mechanical properties" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 8, "imageuri": "https://productimages.withfloats.com/actual/63b6e888fdd99e000124ef60.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/63b6e888fdd99e000124ef60.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-05T15:11:01.809Z", "updatedon": "2023-01-05T15:11:01.809Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/gp-resin-/8", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Jay Enterprises", "category": "GP Resin", "tags": [ "GP Resin", "Fiber", "Clear Resin", "Mat resin", "PET Resin", "Fiber Resin", "Water Poof Resin" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }