Home> Products> higher tack

{ "products": [ { "_id": "65646945c8587c03908610e5", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Silicone Rubber , Thickness: Start From 5 To 30 %, Quantity Per Pack: 500gram + 500gram Packing", "description": "Silicone rubbers have excellent low temperature flexibility combined with outstanding high temperature resistance. Their service temperatures range from −70 °C to 250 °C.46 Silicone rubbers commonly used in pressure-sensitive adhesives are the dimethylsiloxanes or their phenyl-modified versions, shown in (5), where R = Me or (up to 25 mol %) Ph. The modification with phenyl groups gives materials with higher tack, low temperature flexibility (by preventing crystallization at −40 °C) and increased high temperature stability. These linear gums are blended with highly branched silicon resins—prepared by condensation of trimethyl(chloro)silane with silicic acid—to adjust tack as well as the physical properties of the adhesive.", "price": 2500.0, "discountamount": 1100.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "250 °", "−40 °C", "−70 °C", "materials", "Thickness", "higher tack", "linear gums", "modification", "silicic acid", "condensation", "25 mol %) Ph.", "phenyl groups", "silicon resins", "500gram Packing", "Silicone Rubber", "crystallization", "dimethylsiloxanes", "Quantity Per Pack", "physical properties", "service temperatures", "trimethyl(chloro)silane", "phenyl-modified versions", "high temperature stability", "pressure-sensitive adhesives", "excellent low temperature flexibility", "outstanding high temperature resistance" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 129, "imageuri": "https://productimages.withfloats.com/actual/6564694e8a18ed310e52ae81.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/6564694e8a18ed310e52ae81.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-11-27T10:02:45.447Z", "updatedon": "2023-11-27T10:02:45.447Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/silicone-rubber-thickness-start-from-5-to-30-quantity-per-pack-500gram-500gram-packing/129", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SILOZCEST", "category": "Silicone Rubber , Thickness: Start From 5 To 30 %, Quantity Per Pack: 500gram + 500gram Packing", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6565bee33ddfea1a58dcaccc", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Mould Release Liquid ,Silicone Mould, Epoxy , Etc.", "description": "MOULD RELEASING LIQUID .\n*silicone mould releasing liquid , easy to remove mould by applying \nbefore pouring liquid.\nSilicone rubber mold release liquid can be applied as a spray or with a brush. For spraying, you can use a nozzle that creates a fine fog and make a single pass across the surface. If brushing is used, you can break surface tension and minimize air entrapment by applying the release agent with a soft brush. You can then apply another light mist coating and let it stand for five minutes before applying mold rubber. \nYou can dilute the mold release with water to create an active content of 0.5–2%. In some cases, a higher concentration may be preferable. Avoid applying too much mold release, as this can cause surface irregularities and poor welds. \nSilicone release agents can be used in a wide range of applications, including:\nImproving product quality\nImproving work efficiency\nReleasing during the molding of rubber, plastic, and metal parts\nReleasing during the molding of food packaging containers\nGlossing\nSurface protection\nLubrication \nSilicone rubber is used in many applications, including:\nBuilding construction and infrastructure\nConsumer goods and appliances\nFood and beverage\nMobility\nPower water and telecommunications\nTextiles, leather, and nonwovens ", "price": 500.0, "discountamount": 250.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Etc.", "Epoxy", "LIQUID", "Mould Release", "Silicone Mould" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 142, "imageuri": "https://productimages.withfloats.com/actual/6565beea820f6e498dcff038.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/6565beea820f6e498dcff038.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-11-28T10:20:19.881Z", "updatedon": "2024-04-05T12:49:07.182Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/mould-release-liquid-silicone-mould-epoxy-etc-/142", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "silozcest", "category": "Mould Release Liquid ,Silicone Mould, Epoxy , Etc", "tags": [ "Release agent", "Wax release agent", "silicone mould release agents", "liquidsilicone mould release" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63c8fc6a6962c00001584d79", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Transparent Liquid Silicon rubber with Epoxy Art Work ", "description": "Transparent Liquid Silicon rubber with Epoxy Art Work \n\nHow To Apply ArtResin\nMix together equal parts from each bottle, stirring for 3 minutes. Then just pour the liquid mixture over your project and spread.\n\nLeave it to dry for 24 hours and then love it forever!\n\nMEASURE\nWith gloves on, pour equal amounts of resin and hardener into a mixing cup. You can refer to our resin coverage calculator to determine how much you'll need, but just for quick reference, the 32 oz Starter Kit covers 8 sq. ft., the 1 gal Studio kit covers 32 sq. ft. and the 2 gal Professional Kit covers 64 sq. ft.\n\nTIP - Mix up a little more than you think you’ll need because you want to completely cover your work in one shot and not have to mix more later.\n\nMIX\nStir really well for at least 3 minutes. Scrape the sides and the bottom to make sure you’re being thorough (unmixed material will leave you with sticky spots that just won’t cure). Once you put the resin and hardener together, you’ll have about 45 minutes of working time before the resin thickens and cures.\n\nPOUR\nAfter making sure your piece is level, go ahead and pour ArtResin® over your work. Don’t be scared! It’ll start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You’ll notice bubbles will begin to rise to the surface. Many of these will pop on their own, but you can also pop them yourself for a flawless finish—our Artist's Torch works great for this (see our how-to videos for more info).\n\nTIP - Wooden panels work best for large pieces rather than canvas because they won’t sag under the weight of the resin.\n\nWAIT\nArtResin needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.\n\nCLEAN UP - To reuse your mixing tools, wipe them down with a paper towel before the resin dries. \n\nFor More Information Jay Enterprises Bangalore / Karnataka.\nPH : 8050657801 /8884343524 . \n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "PH", "TIP", "8 sq", "WAIT", "32 sq", "64 sq", "sides", "place", "edges", "brush", "cures", "Torch", "touch", "Artist", "bottom", "videos", "canvas", "weight", "gloves", "bottle", "surface", "MEASURE", "project", "bubbles", "8 hours", "12 hours", "ArtResin", "72 hours", "one shot", "24 hours", "Karnataka", "3 minutes", "mixing cup", "45 minutes", "equal parts", "resin dries", "paper towel", "second coat", "sticky spots", "working time", "large pieces", "mixing tools", "Wooden panels", "equal amounts", "several hours", "liquid mixture", "Epoxy Art Work", "flawless finish", "dust-free space", "quick reference", "1 gal Studio kit", "unmixed material", "32 oz Starter Kit", "2 gal Professional Kit", "resin coverage calculator", "Transparent Liquid Silicon rubber", "More Information Jay Enterprises Bangalore" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 14, "imageuri": "https://productimages.withfloats.com/actual/63c8fc6dba77fa0001df760b.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/63c8fc6dba77fa0001df760b.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-19T08:16:42.366Z", "updatedon": "2023-01-19T08:16:42.366Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/transparent-liquid-silicon-rubber-with-epoxy-art-work-/14", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "JayEnterprises", "category": "Transparent Liquid Silicon rubber & Epoxy Art Work", "tags": [ "Epoxy", "Liquid Silicon rubber.", "Transparent Liquid Silicon rubber with Epoxy Art W", "Transparent Liquid Silicon rubber with Epoxy Art W" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63b79c3170a42300016a4ca9", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "ISO Resin ", "description": "ISO Resin\nISO Resin is a medium viscosity, medium reactive polyester resin based on Isophthalic acid and superior glycols. It exhibits good mechanical and electrical properties together with good chemical resistance compared to general-purpose resins.\n\n Download Now\nProduct Features & Benefits:\nISO Resin is a medium viscosity, medium reactive polyester resin based on Isophthalic acid and superior glycols. It exhibits good mechanical and electrical properties together with good chemical resistance compared to general-purpose resins.\nISO rapidly wets the surface of glass fiber in the form of cloth mat or chopped fiber to produce laminates and moldings. Its superior chemicals resistance towards most mineral and organic acids, solvents and oils make an ideal choice for making glass reinforced chemical process equipment, storage tanks, tankers, ducting, hoods etc. for handling chemicals at ambient temperature. Moulds, boats, and bathtubs etc can also be made\n\nTypical Applications:\nChemical Tanks/Pipelines\nFume extractor\nDuct\nHood\nChemical equipment\nTanker\nBoat\n\n* Using Accelerator, Co (2%) 1 ml, Catalyst, MEKP1.5ml, the gel time, cure time and Peak Exotherm measured.\n* Summer ω Winter [TM - Test Method as per ISO-9001-2000-DOC-REV-03]\n* Post cured Result\n\nUsage:\nChemical Resistance:\nUnreinforced castings show a commendable degree of resistance to most inorganic and organic acids at ambient temperature, with the exception of strong oxidizing acids. It also resists oils, plasticizers and inorganic salt solutions. Strong acids and alkalis attack For specific application please contact our technical services department. In boiling water orthophthalate resin showed signs of disintegration within 40 hours, whereas showed no disintegration even after 60 hours. In 10% sulfuric acid and 5% aqueous caustic soda showed much superior resistance compared to general-purpose orthophthalate resin. In the latter reagent specimens of orthophthalate resin disintegrated within an hour.\nPost Curing:\nIt is recommended to mature the products for 24 hours and post curing should be done for minimum of five hours at 800C, or 2-3 weeks at room temperature. This is essential for getting the optimum properties.\n\nStorage / Handling:\nThe polyester resin remains stable for 3 months at 300C in the dark and 4 months at 250C. The resin stability deteriorates markedly at elevated temperature, especially when exposed to direct sunlight. ISO Resin has a flash point of 340C and is classified as flammable. \"NO SMOKING \" rules should be strictly followed. In case of spillage, use sand or earth to absorb and shovel off for disposal as per local regulations, In case of fire, use dry chemical foam, Carbon dioxide or water spray to extinguish the flame.\n\nPacking:\nThe Polyester resin is packed in HDPE carboys ( 30, 35, 40 & 45 kgs ) and epoxy coated steel drums HDPE barrels\n(220 kgs) of standard size net weight. Special packing size offered for projects on returnable containers. Technical services are also provided to comply standards.\n\nHealth & Safety:\nNever add metal salts (Accelerator) or Pre Acceleratorated resin to Peroxides when adding peroxides to a resin solution, mix thoroughly the resulting product Do not add organic peroxides to a hot diluents or process. Prevent contamination of Accelerator, promoter from materials like ( Iron Copper, Cobalt ) salts, storing acids and sanding dusts. Suggested containers are glass, polypropylene, Teflon, Poly-ethylene or stainless steel to prevent contamination of material during its handling.", "price": 160.0, "discountamount": 20.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "resin stability", "use dry chemical foam", "electrical properties", "strong oxidizing acids", "good chemical resistance", "much superior resistance", "exhibits good mechanical", "inorganic salt solutions", "Pre Acceleratorated resin", "water orthophthalate resin", "chemical process equipment", "specific application please", "superior chemicals resistance", "technical services department", "medium reactive polyester resin" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 9, "imageuri": "https://productimages.withfloats.com/actual/63b79c32d6b95400015b8990.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/63b79c32d6b95400015b8990.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-06T03:57:37.359Z", "updatedon": "2023-01-06T03:57:37.359Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/iso-resin-/9", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Jay Enterprises", "category": "FiberResin", "tags": [ "ISO Resin", "iso", "resin iso", "fiber resin", "hardner", "fiberglass mat" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63aea901df88490001942201", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Catlyst - MEKP ", "description": "MEKP (Methyl Ethyl Ketone Peroxide) is the catalyst added to polyester resins and vinyl ester resins. As the catalyst mixes with the resin, a chemical reaction occurs, creating heat which cures (hardens) the resin. Use approximately 1/2 oz per quart of resin. We recommend the use of our MEKP Catalyst Dispenser for accurate measuring and pouring of the catalyst. \n\nMEKP is principally used as an initiator or catalyst for the room temperature cure of unsaturated polyester and vinyl ester resins. It is also needed with all gel coats. It is typically used between 1.25% to 1.75% (1 2/3 ounce to 2 1/3 ounces per gallon).\n\nDirections for Using MEKP Catalyst\nMEKP stands for Methyl Ethyl Ketone Peroxide and is for use with polyester resins. This is a very dangerous material.\nSafety *\nCatalyst is very corrosive and thus is a prohibited airfreight or postage item. It is also highly inflammable. Both heat and sunlight affect\nit and incorrect storage can render it useless. Ideally it should be stored under refrigeration. It has an attraction for milk food products\nand needs to be very well sealed or placed in a refrigerator that doesn’t house food stuffs. We have found that it doesn’t contaminate\nstubbies or cans!!\nWhen mixing MEKP with resin, take care as a violent mixing action can splash it out of the mixing container. Use a measuring cup\nrather than a syringe as it can be shot into the container and bounce back into the eyes. Mix thoroughly and methodically into the resin\notherwise some portions of resin may not be catalysed and thus not cure properly.\n\nKeep out of reach of children and if they are to use it, make sure they are instructed in its use and are properly supervised.\nThese days, most resins you use will be pre accelerated or have accelerator added, usually of the cobalt variety (a purple liquid.) Should\nyou be adding cobalt accelerator, it must be thoroughly dispersed in the resin prior to adding the catalyst. The accidental mixing of\ncobalt accelerator with MEKP will result in a violent reaction =BANG!\nFirst Aid*\nMEKP attacks eyes-Protect eyes while using. If splashed into the eyes immediately flood with water for 15 minutes and seek medical\nadvice. This is very important as permanent blindness can result within 15 seconds.\nIf swallowed do not induce vomiting, give glass of water and seek medical advice\nAvoid skin contact-Wear protective clothing. If skin contact does occur, remove all contaminated clothing and wash skin thoroughly.\nSeek medical advice\nHow much to use?\nWe usually express this in terms of percentage ie:1% catalyst to resin = 10ml of catalyst to 1kg of resin. A rule of thumb for polyester\nlaminating resin is between 1% and 2% i.e. 1% for summer (to give maximum wetting time) and 2% for winter.\nFor polyester Gelcoats used in a moulding situation, we recommend from 2% to 2.5%catalyst. The reason for this is that if the gelcoat\nis under cured, the backup laminating resin will bite into the gelcoat and cause wrinkling or puckering. If the gelcoat is to be used as a\nfinish over a laminate, the 1% to 2% rule applies. The addition of 4 % styrene wax in the final coat, will give it a harder, less tacky\nfinish.\nYou will have noted by now that we are measuring resin by weight-the reason is that it is the easiest way to be accurate. With polyester\nresin, kitchen scales will suffice. (Scales can always be put in a clear plastic bag, this keeps you out of trouble with the cook!) There\nreally is NO substitute for using the weigh method.\n\n\n", "price": 350.0, "discountamount": 100.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "catalyst mixes", "polyester resins", "violent reaction", "house food stuffs", "polyester Gelcoats", "vinyl ester resins", "cobalt accelerator", "protective clothing", "permanent blindness", "unsaturated polyester", "room temperature cure", "violent mixing action", "MEKP Catalyst Dispenser", "give maximum wetting time", "Methyl Ethyl Ketone Peroxide" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 3, "imageuri": "https://productimages.withfloats.com/actual/63aea903a8fd2d00010b66cc.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/63aea903a8fd2d00010b66cc.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-12-30T09:01:53.88Z", "updatedon": "2022-12-30T09:01:53.88Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/catlyst-mekp-/3", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "JayEnterprises", "category": "Fiber Hardener", "tags": [ "MEKP", "Catalyst", "Resin", "Hardness", "Resin Hardner", "Fiber Resin", "Polyester Resin", "Ketone", "MEKP hardner", "Mixing Hardness", "Catalysed", "Curu Properly", "Mixing Rato", "Pot-life", "Cure", "Speed dry", "Pot-life 3month", "RT", "Room Temprature", "Curuing Fast", "How to use catalyst", "Quantity mixing ratio of MEKP", "Catlyst to gelcoat", "Fiberglass Work", "Fiber Hardner", "Fiber Mekep", "Mekp and cobalt", "Cobalt and Catlyst", "Mekp and 6%" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "682476f8e51d78b64ab701a5", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Black Liquid Rubber Waterproofing Coating – Flexible, Durable Protection for Roofs, Foundations", "description": "Our Black Liquid Rubber Waterproofing Coating is a tough, flexible membrane designed to provide long-lasting water protection for a wide range of surfaces. Unlike sealants, this liquid-applied coating cures into a thick, seamless rubber layer that resists water penetration, UV rays, and temperature extremes.\n\nPerfect for use on flat roofs, foundations, basements, concrete, wood, metal, and more, this coating offers exceptional adhesion and elasticity. Whether you're waterproofing a new structure or repairing an old one, this product provides industrial-grade protection with an easy roll-on or brush-on application.\n\nKey Benefits:\n\nCreates a seamless, watertight rubber membrane\n\nHighly flexible – won’t crack, peel, or chip\n\nUV and weather resistant for long-term durability\n\nNon-toxic and VOC-free formula\n\nExcellent adhesion to most construction materials\n\nIdeal for both residential and commercial waterproofing projects.", "price": 560.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 1, "_keywords": [ "weather resistant", "chip uv", "easy rollon", "industrialgrade protection", "wide range", "youre waterproofing", "commercial waterproofing projects", "construction materials ideal", "longterm durability nontoxic", "temperature extremes perfect", "liquidapplied coating cures", "surfaces unlike sealants" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 170, "imageuri": "https://productimages.withfloats.com/actual/682476fb0b05f4af2b775c83.png", "tileimageuri": "https://productimages.withfloats.com/tile/682476fb0b05f4af2b775c83.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-05-14T10:56:56.979Z", "updatedon": "2025-08-11T08:45:41.707Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/black-liquid-rubber-waterproofing-coating-flexible-durable-protection-for-roofs-foundations/170", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Star Proof", "category": "Waterproofing Products", "tags": [ "Liquid rubber waterproofing for roofs", "Black waterproof rubber coating", "Best liquid rubber for roof leaks", "Waterproof coating for concrete and wood", "liquid rubber for leaks", "rubber roof coating" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6662ea9dd91d281c30c77100", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Waterproofing Silicone Rubber ", "description": "FRP (Fiber Reinforced Plastic) is a composite material made from a polymer matrix reinforced with fibers such as glass, carbon, or aramid. It is known for its exceptional strength-to-weight ratio, durability, corrosion resistance, and versatility, making it suitable for a wide range of applications across various industries.\n\nMulti-Purpose Usage of FRP Material:\nConstruction and Building Materials: FRP is commonly used for reinforced panels, roofing, flooring, and structural components. Its ability to resist weathering, moisture, and corrosion makes it ideal for both residential and commercial construction, especially in harsh environments.\n\nAutomotive Industry: The lightweight nature of FRP allows it to be used in the manufacture of automotive parts, such as body panels, housings, and interior components. Its high strength-to-weight ratio helps reduce the overall weight of vehicles, improving fuel efficiency without compromising strength.\n\nMarine Applications: FRP is widely used in boats, ships, and marine structures due to its resistance to water, corrosion from saltwater, and durability under harsh marine conditions. It is used for hulls, decking, piping, and other boat parts.\n\nIndustrial Use: The material is highly favored in chemical processing, pharmaceuticals, and food production due to its non-corrosive properties and ability to withstand harsh chemicals. FRP tanks, pipes, and vessels are often used to transport or store corrosive substances.\n\nElectrical Insulation: With its high insulating properties, FRP is used as a non-conductive material for electrical applications. It serves in electrical enclosures, insulating supports, and cable trays.\n\nPipes and Tanks: FRP is commonly used to produce corrosion-resistant pipes, storage tanks, and vessels for applications in industries like oil and gas, water treatment, and agriculture. Its resilience against chemicals and environmental factors makes it ideal for long-term use.\n\nEnergy Sector: In the renewable energy industry, FRP blades for wind turbines, along with its usage in solar panels, help improve efficiency and sustainability. Its lightweight properties help with optimal energy production and transport.\n\nCustom Fabrication: FRP is often used in custom fabrication projects due to its easy moldability and ability to be shaped into complex geometries. It can be tailored for specific needs in a variety of sectors like aerospace, sporting goods, medical equipment, and more.\n\nEco-Friendly Solutions: As a sustainable material, FRP offers long-term durability and recyclability, making it an eco-friendly option for replacing metals and other materials in various sectors.\n\nKey Benefits of FRP:\nStrength and Durability: It is highly resistant to impact, moisture, and environmental degradation.\nCorrosion Resistance: FRP is highly resistant to corrosion from chemicals, water, and salt.\nLightweight: Its low density makes it easier to handle and transport compared to metals like steel.\nCustomizable: FRP can be molded into complex shapes, offering a variety of designs for different applications.\nLow Maintenance: FRP requires minimal maintenance due to its resistance to rust and wear.\nWith its vast range of applications across different industries, FRP is a reliable and multi-purpose material that provides long-lasting, cost-effective solutions.\n\n", "price": 1249.0, "discountamount": 699.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "use", "wear", "soap", "dust", "Time", "dirt", "edges", "seals", "roofs", "steps", "signs", "spots", "areas", "seams", "roller", "period", "debris", "grease", "gaskets", "Coating", "sprayer", "adhesion", "moisture", "soft brush", "clean water", "clean cloth", "second coat", "manufacturer", "instructions", "best results", "water damage", "deterioration", "water ingress", "Right Sealant", "Most sealants", "water solution", "mild detergent", "same procedure", "curing process", "recommendations", "circular motion", "smoother surface", "silicone surfaces", "special attention", "complete coverage", "optimal protection", "other contaminants", "fine-grit sandpaper", "Regular Maintenance", "additional protection", "waterproofing material", "long-lasting protection", "silicone rubber surfaces", "long-lasting waterproofing", "Waterproofing Silicone Rubber", "proper application techniques", "high-quality waterproofing products", "Silicone-based waterproofing products" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 169, "imageuri": "https://productimages.withfloats.com/actual/66b36511ed2add4d6bbb1d4f.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/66b36511ed2add4d6bbb1d4f.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-06-07T11:10:21.102Z", "updatedon": "2025-01-08T09:36:21.652Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/waterproofing-silicone-rubber-/169", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": -1, "uniquepaymenturl": null, "brandname": "Jay Enterprise Bangalore ", "category": "Waterproofing Chemicals, Liquid", "tags": [ "FRP Composite Material", "Multi-purpose FRP", "Fiber Reinforced Plastic Applications", "FRP for Construction", "FRP for Automotive", "FRP for Marine", "FRP for Industrial Use" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "64c252c8b34a33ff876b4206", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6662d644db9fdd21801f08ad", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Mold Making Classes ", "description": "Molding Classes are Aviable in Affordable price \nLearn the BEST MOLDING TECHINEQUE IN BANGALORE \nFor More info Contact \nPh : 8050657801 / 8884343524 ", "price": 9500.0, "discountamount": 4501.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "More info", "BANGALORE", "Contact Ph", "Molding Classes", "Affordable price", "Making Classes Aviable", "BEST MOLDING TECHINEQU" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 168, "imageuri": "https://productimages.withfloats.com/actual/6662d6490b1c30627457fc97.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/6662d6490b1c30627457fc97.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-06-07T09:43:32.945Z", "updatedon": "2024-12-30T11:33:50.203Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/mold-making-classes-/168", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Jayenterprise / Chemzest ", "category": "Molding Classes", "tags": [ "Molding Class, Molding Compond , Siliocn Molds", "how to make moulds", "mould making classes", "banglore silicone rubber liquid for mould making" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6626445249be7218fcf4d413", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLATINUM GRADE Liquid Silicone Rubber-LSR 125-1kg 25 shore", "description": "125 is little harder than LSR-120 and it is mainly used for making molds of food grade applications like chocolate, candy products and life casting applications. It also can be used for making molds for concrete stone ,GRC, polyurethane products ; wax, candle decoration ; rapid prototyping BY WEIGHT - Easy to use silicone rubber compound features a convenient mixing ratio by weight. Use weighing machine for proper measurement and to avoid mistakes. SHORE A HARDNESS: 25ᵒA - This scale measures the hardness of Medium flexible rubber. A 20ᵒA hardness is in the medium soft range.· LOW VISCOSITY: You can easily mix and pour this rubber compound, creating one-block or two-block pieces with vacuum degassing require. PERFECT FOR MEDICAL AND INDUSTRIAL APPLICATIONS - Often used for making molds for Artificial Jewelry mold making , Jelly Tray Making and some industrial applications. POT LIFE AND CURE TIME - Pot life is 10 min and Curing time will 8 hrs. For maximum results, store the products at room temperature!", "price": 3000.0, "discountamount": 1401.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Box", "Paste", "Manual", "detail", "weight", "1 KG Pack", "good level", "Industrial", "basic steps", "Mixing Ratio", "simple molds", "texture stamps", "JAYENTERPRISES", "molding material", "firm rubbery texture", "SILOCZEST SILICONE PUTTY" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 167, "imageuri": "https://productimages.withfloats.com/actual/66b36e613c1ea5297f3b651f.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/66b36e613c1ea5297f3b651f.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-04-22T11:04:50.232Z", "updatedon": "2025-01-02T13:14:03.829Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/platinum-grade-liquid-silicone-rubber-lsr-125-1kg-25-shore/167", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Siloczest", "category": "Liquid Silicone Rubber", "tags": [ "Platinum Grade Silicone", "Mold Making", "Platinum-cured silicone", "chemzest", "siloczest", "jayenterprises silicone rubber", "Food grade silicone rubber", "Prosthetic silicone material", "Medical grade silicone", "FDA approved silicone", "Liquid platinum silicone", "Silicone for prosthetics", "Hypoallergenic silicone", "Non-toxic silicone rubber", "Biocompatible silicone" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "64c252c8b34a33ff876b4206", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }