Home> Products> house food stuffs

{ "products": [ { "_id": "63aea901df88490001942201", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Catlyst - MEKP ", "description": "MEKP (Methyl Ethyl Ketone Peroxide) is the catalyst added to polyester resins and vinyl ester resins. As the catalyst mixes with the resin, a chemical reaction occurs, creating heat which cures (hardens) the resin. Use approximately 1/2 oz per quart of resin. We recommend the use of our MEKP Catalyst Dispenser for accurate measuring and pouring of the catalyst. \n\nMEKP is principally used as an initiator or catalyst for the room temperature cure of unsaturated polyester and vinyl ester resins. It is also needed with all gel coats. It is typically used between 1.25% to 1.75% (1 2/3 ounce to 2 1/3 ounces per gallon).\n\nDirections for Using MEKP Catalyst\nMEKP stands for Methyl Ethyl Ketone Peroxide and is for use with polyester resins. This is a very dangerous material.\nSafety *\nCatalyst is very corrosive and thus is a prohibited airfreight or postage item. It is also highly inflammable. Both heat and sunlight affect\nit and incorrect storage can render it useless. Ideally it should be stored under refrigeration. It has an attraction for milk food products\nand needs to be very well sealed or placed in a refrigerator that doesn’t house food stuffs. We have found that it doesn’t contaminate\nstubbies or cans!!\nWhen mixing MEKP with resin, take care as a violent mixing action can splash it out of the mixing container. Use a measuring cup\nrather than a syringe as it can be shot into the container and bounce back into the eyes. Mix thoroughly and methodically into the resin\notherwise some portions of resin may not be catalysed and thus not cure properly.\n\nKeep out of reach of children and if they are to use it, make sure they are instructed in its use and are properly supervised.\nThese days, most resins you use will be pre accelerated or have accelerator added, usually of the cobalt variety (a purple liquid.) Should\nyou be adding cobalt accelerator, it must be thoroughly dispersed in the resin prior to adding the catalyst. The accidental mixing of\ncobalt accelerator with MEKP will result in a violent reaction =BANG!\nFirst Aid*\nMEKP attacks eyes-Protect eyes while using. If splashed into the eyes immediately flood with water for 15 minutes and seek medical\nadvice. This is very important as permanent blindness can result within 15 seconds.\nIf swallowed do not induce vomiting, give glass of water and seek medical advice\nAvoid skin contact-Wear protective clothing. If skin contact does occur, remove all contaminated clothing and wash skin thoroughly.\nSeek medical advice\nHow much to use?\nWe usually express this in terms of percentage ie:1% catalyst to resin = 10ml of catalyst to 1kg of resin. A rule of thumb for polyester\nlaminating resin is between 1% and 2% i.e. 1% for summer (to give maximum wetting time) and 2% for winter.\nFor polyester Gelcoats used in a moulding situation, we recommend from 2% to 2.5%catalyst. The reason for this is that if the gelcoat\nis under cured, the backup laminating resin will bite into the gelcoat and cause wrinkling or puckering. If the gelcoat is to be used as a\nfinish over a laminate, the 1% to 2% rule applies. The addition of 4 % styrene wax in the final coat, will give it a harder, less tacky\nfinish.\nYou will have noted by now that we are measuring resin by weight-the reason is that it is the easiest way to be accurate. With polyester\nresin, kitchen scales will suffice. (Scales can always be put in a clear plastic bag, this keeps you out of trouble with the cook!) There\nreally is NO substitute for using the weigh method.\n\n\n", "price": 350.0, "discountamount": 100.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "catalyst mixes", "polyester resins", "violent reaction", "house food stuffs", "polyester Gelcoats", "vinyl ester resins", "cobalt accelerator", "protective clothing", "permanent blindness", "unsaturated polyester", "room temperature cure", "violent mixing action", "MEKP Catalyst Dispenser", "give maximum wetting time", "Methyl Ethyl Ketone Peroxide" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 3, "imageuri": "https://productimages.withfloats.com/actual/63aea903a8fd2d00010b66cc.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/63aea903a8fd2d00010b66cc.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-12-30T09:01:53.88Z", "updatedon": "2022-12-30T09:01:53.88Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/catlyst-mekp-/3", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "JayEnterprises", "category": "Fiber Hardener", "tags": [ "MEKP", "Catalyst", "Resin", "Hardness", "Resin Hardner", "Fiber Resin", "Polyester Resin", "Ketone", "MEKP hardner", "Mixing Hardness", "Catalysed", "Curu Properly", "Mixing Rato", "Pot-life", "Cure", "Speed dry", "Pot-life 3month", "RT", "Room Temprature", "Curuing Fast", "How to use catalyst", "Quantity mixing ratio of MEKP", "Catlyst to gelcoat", "Fiberglass Work", "Fiber Hardner", "Fiber Mekep", "Mekp and cobalt", "Cobalt and Catlyst", "Mekp and 6%" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6662ea9dd91d281c30c77100", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Waterproofing Silicone Rubber ", "description": "FRP (Fiber Reinforced Plastic) is a composite material made from a polymer matrix reinforced with fibers such as glass, carbon, or aramid. It is known for its exceptional strength-to-weight ratio, durability, corrosion resistance, and versatility, making it suitable for a wide range of applications across various industries.\n\nMulti-Purpose Usage of FRP Material:\nConstruction and Building Materials: FRP is commonly used for reinforced panels, roofing, flooring, and structural components. Its ability to resist weathering, moisture, and corrosion makes it ideal for both residential and commercial construction, especially in harsh environments.\n\nAutomotive Industry: The lightweight nature of FRP allows it to be used in the manufacture of automotive parts, such as body panels, housings, and interior components. Its high strength-to-weight ratio helps reduce the overall weight of vehicles, improving fuel efficiency without compromising strength.\n\nMarine Applications: FRP is widely used in boats, ships, and marine structures due to its resistance to water, corrosion from saltwater, and durability under harsh marine conditions. It is used for hulls, decking, piping, and other boat parts.\n\nIndustrial Use: The material is highly favored in chemical processing, pharmaceuticals, and food production due to its non-corrosive properties and ability to withstand harsh chemicals. FRP tanks, pipes, and vessels are often used to transport or store corrosive substances.\n\nElectrical Insulation: With its high insulating properties, FRP is used as a non-conductive material for electrical applications. It serves in electrical enclosures, insulating supports, and cable trays.\n\nPipes and Tanks: FRP is commonly used to produce corrosion-resistant pipes, storage tanks, and vessels for applications in industries like oil and gas, water treatment, and agriculture. Its resilience against chemicals and environmental factors makes it ideal for long-term use.\n\nEnergy Sector: In the renewable energy industry, FRP blades for wind turbines, along with its usage in solar panels, help improve efficiency and sustainability. Its lightweight properties help with optimal energy production and transport.\n\nCustom Fabrication: FRP is often used in custom fabrication projects due to its easy moldability and ability to be shaped into complex geometries. It can be tailored for specific needs in a variety of sectors like aerospace, sporting goods, medical equipment, and more.\n\nEco-Friendly Solutions: As a sustainable material, FRP offers long-term durability and recyclability, making it an eco-friendly option for replacing metals and other materials in various sectors.\n\nKey Benefits of FRP:\nStrength and Durability: It is highly resistant to impact, moisture, and environmental degradation.\nCorrosion Resistance: FRP is highly resistant to corrosion from chemicals, water, and salt.\nLightweight: Its low density makes it easier to handle and transport compared to metals like steel.\nCustomizable: FRP can be molded into complex shapes, offering a variety of designs for different applications.\nLow Maintenance: FRP requires minimal maintenance due to its resistance to rust and wear.\nWith its vast range of applications across different industries, FRP is a reliable and multi-purpose material that provides long-lasting, cost-effective solutions.\n\n", "price": 1249.0, "discountamount": 699.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "use", "wear", "soap", "dust", "Time", "dirt", "edges", "seals", "roofs", "steps", "signs", "spots", "areas", "seams", "roller", "period", "debris", "grease", "gaskets", "Coating", "sprayer", "adhesion", "moisture", "soft brush", "clean water", "clean cloth", "second coat", "manufacturer", "instructions", "best results", "water damage", "deterioration", "water ingress", "Right Sealant", "Most sealants", "water solution", "mild detergent", "same procedure", "curing process", "recommendations", "circular motion", "smoother surface", "silicone surfaces", "special attention", "complete coverage", "optimal protection", "other contaminants", "fine-grit sandpaper", "Regular Maintenance", "additional protection", "waterproofing material", "long-lasting protection", "silicone rubber surfaces", "long-lasting waterproofing", "Waterproofing Silicone Rubber", "proper application techniques", "high-quality waterproofing products", "Silicone-based waterproofing products" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 169, "imageuri": "https://productimages.withfloats.com/actual/66b36511ed2add4d6bbb1d4f.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/66b36511ed2add4d6bbb1d4f.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-06-07T11:10:21.102Z", "updatedon": "2025-01-08T09:36:21.652Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/waterproofing-silicone-rubber-/169", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": -1, "uniquepaymenturl": null, "brandname": "Jay Enterprise Bangalore ", "category": "Waterproofing Chemicals, Liquid", "tags": [ "FRP Composite Material", "Multi-purpose FRP", "Fiber Reinforced Plastic Applications", "FRP for Construction", "FRP for Automotive", "FRP for Marine", "FRP for Industrial Use" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "64c252c8b34a33ff876b4206", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6626445249be7218fcf4d413", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLATINUM GRADE Liquid Silicone Rubber-LSR 125-1kg 25 shore", "description": "125 is little harder than LSR-120 and it is mainly used for making molds of food grade applications like chocolate, candy products and life casting applications. It also can be used for making molds for concrete stone ,GRC, polyurethane products ; wax, candle decoration ; rapid prototyping BY WEIGHT - Easy to use silicone rubber compound features a convenient mixing ratio by weight. Use weighing machine for proper measurement and to avoid mistakes. SHORE A HARDNESS: 25ᵒA - This scale measures the hardness of Medium flexible rubber. A 20ᵒA hardness is in the medium soft range.· LOW VISCOSITY: You can easily mix and pour this rubber compound, creating one-block or two-block pieces with vacuum degassing require. PERFECT FOR MEDICAL AND INDUSTRIAL APPLICATIONS - Often used for making molds for Artificial Jewelry mold making , Jelly Tray Making and some industrial applications. POT LIFE AND CURE TIME - Pot life is 10 min and Curing time will 8 hrs. For maximum results, store the products at room temperature!", "price": 3000.0, "discountamount": 1401.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Box", "Paste", "Manual", "detail", "weight", "1 KG Pack", "good level", "Industrial", "basic steps", "Mixing Ratio", "simple molds", "texture stamps", "JAYENTERPRISES", "molding material", "firm rubbery texture", "SILOCZEST SILICONE PUTTY" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 167, "imageuri": "https://productimages.withfloats.com/actual/66b36e613c1ea5297f3b651f.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/66b36e613c1ea5297f3b651f.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-04-22T11:04:50.232Z", "updatedon": "2025-01-02T13:14:03.829Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/platinum-grade-liquid-silicone-rubber-lsr-125-1kg-25-shore/167", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Siloczest", "category": "Liquid Silicone Rubber", "tags": [ "Platinum Grade Silicone", "Mold Making", "Platinum-cured silicone", "chemzest", "siloczest", "jayenterprises silicone rubber", "Food grade silicone rubber", "Prosthetic silicone material", "Medical grade silicone", "FDA approved silicone", "Liquid platinum silicone", "Silicone for prosthetics", "Hypoallergenic silicone", "Non-toxic silicone rubber", "Biocompatible silicone" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "64c252c8b34a33ff876b4206", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6565c38959e16019e406af6f", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Liquid silicone Rubber Lsr-105 shore 5", "description": " Jay enterprises LSR-105 is mainly used for making soft silicone products , such as body organs , artificial limbs ,artificial breasts ,body breast enhancers , silicone toys , silicone simulation skin , etc\nIts food Grade Two-part silicon rubber: flowable addition cure silicon\nMedium Fast curing. Cures at room temperature within 5-8 hours.\nAn exceptional fluidity and good operability, easy to demold.\nGood tensile and tear strength, no shrinkage.", "price": 2600.0, "discountamount": 1100.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Cures", "shrinkage", "5-8 hours", "food Grade", "body organs", "Good tensile", "tear strength", "silicone toys", "good operability", "room temperature", "artificial limbs", "Medium Fast curing", "artificial breasts", "exceptional fluidity", "body breast enhancers", "soft silicone products", "Two-part silicon rubber", "silicone simulation skin", "flowable addition cure silicon", "Liquid silicone Rubber Lsr-105 shore" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 145, "imageuri": "https://productimages.withfloats.com/actual/66bef3a99c7f1dc3ce821235.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/66bef3a99c7f1dc3ce821235.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-11-28T10:40:09.648Z", "updatedon": "2024-08-16T06:37:27.183Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/liquid-silicone-rubber-lsr-105-shore-5/145", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Jay Enterprises ", "category": "Food Grade", "tags": [ "platinum silicone rubber", "medical grade silcone liquid", "body making silicone rubber", "dental", "Prosthetic materials", "dragon silocone", "food grade silicone" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6565bf8dbc61681d48829e87", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Skin Grade Liquid Silicon Rubber", "description": "Silicone rubber, also known as food or medical-grade silicone is a popular material for consumer, healthcare, and industrial products because it’s skin-contact safe, durable, flexible, and soft to the touch. But not all material labeled “medical” grade meets that standard. To give our customers peace of mind, Casco Bay Molding uses full-traceability platinum cured medical grade silicone. We also manufacture all of our products per ISO:13485 standards and manufacture several FDA-registered parts. Quality is critical no matter the product you’re developing. That’s why we exclusively use medical grade silicone, otherwise known as LSR (liquid silicone rubber).", "price": 2000.0, "discountamount": 1100.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "LSR", "mind", "food", "peace", "touch", "Quality", "consumer", "customers", "healthcare", "popular material", "Casco Bay Molding", "industrial products", "ISO:13485 standards", "medical-grade silicone", "medical grade silicone", "liquid silicone rubber", "several FDA-registered parts", "Skin Grad Liquid Silicon Rubber", "full-traceability platinum cured" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 143, "imageuri": "https://productimages.withfloats.com/actual/6565bf94b201c42655f6757f.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/6565bf94b201c42655f6757f.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-11-28T10:23:09.342Z", "updatedon": "2024-04-05T10:29:16.149Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/skin-grade-liquid-silicon-rubber/143", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "silozcest", "category": "Skin Grad Liquid Silicon Rubber", "tags": [ "platinum grade silicone rubber", "body casting silicone", "medical grade silcone liquid", "makiprosthetic ng liquid", "prosthetic making material", "Prosthetic materials" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6565bee33ddfea1a58dcaccc", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Mould Release Liquid ,Silicone Mould, Epoxy , Etc.", "description": "MOULD RELEASING LIQUID .\n*silicone mould releasing liquid , easy to remove mould by applying \nbefore pouring liquid.\nSilicone rubber mold release liquid can be applied as a spray or with a brush. For spraying, you can use a nozzle that creates a fine fog and make a single pass across the surface. If brushing is used, you can break surface tension and minimize air entrapment by applying the release agent with a soft brush. You can then apply another light mist coating and let it stand for five minutes before applying mold rubber. \nYou can dilute the mold release with water to create an active content of 0.5–2%. In some cases, a higher concentration may be preferable. Avoid applying too much mold release, as this can cause surface irregularities and poor welds. \nSilicone release agents can be used in a wide range of applications, including:\nImproving product quality\nImproving work efficiency\nReleasing during the molding of rubber, plastic, and metal parts\nReleasing during the molding of food packaging containers\nGlossing\nSurface protection\nLubrication \nSilicone rubber is used in many applications, including:\nBuilding construction and infrastructure\nConsumer goods and appliances\nFood and beverage\nMobility\nPower water and telecommunications\nTextiles, leather, and nonwovens ", "price": 500.0, "discountamount": 250.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Etc.", "Epoxy", "LIQUID", "Mould Release", "Silicone Mould" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 142, "imageuri": "https://productimages.withfloats.com/actual/6565beea820f6e498dcff038.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/6565beea820f6e498dcff038.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-11-28T10:20:19.881Z", "updatedon": "2024-04-05T12:49:07.182Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/mould-release-liquid-silicone-mould-epoxy-etc-/142", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "silozcest", "category": "Mould Release Liquid ,Silicone Mould, Epoxy , Etc", "tags": [ "Release agent", "Wax release agent", "silicone mould release agents", "liquidsilicone mould release" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "655f277faf8d5022fc819cc8", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Platinum Grade Liquid Silicone Rubber-LSR 130-1kg", "description": "Jay Enterprises LSR-130 is little harder than LSR-125 and it is mainly used for making molds of food grade applications like chocolate,candy products . It also can be used for making molds for concrete stone,GRC,polyurethane products ; wax, candle decoration ; rapid prototyping\nIts food Grade Two-part silicon rubber: flowable addition cure silicon\nMedium Fast curing. Cures at room temperature within 5-8 hours.Degassing is required\nAn exceptional fluidity and good operability, easy to demold.\nGood tensile and tear strength, no shrinkage.", "price": 2000.0, "discountamount": 650.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "kg", "wax", "GRC", "Cures", "molds", "5-8 hours", "chocolate", "Degassing", "shrinkage", "Good tensile", "tear strength", "concrete stone", "candy products", "room temperature", "good operability", "candle decoration", "rapid prototyping", "Medium Fast curing", "Jay Enterprises LSR", "exceptional fluidity", "polyurethane products", "food grade applications", "Two-part silicon rubber", "flowable addition cure silicon", "Platinum Grade Liquid Silicone Rubber-LSR" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 113, "imageuri": "https://productimages.withfloats.com/actual/655f2789d54e5a946657c2ef.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/655f2789d54e5a946657c2ef.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-11-23T10:20:47.967Z", "updatedon": "2023-11-23T10:20:47.967Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/platinum-grade-liquid-silicone-rubber-lsr-130-1kg/113", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SILOZCEST", "category": "Platinum Grade Liquid Silicone Rubber-LSR 130-1kg", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "655f26e56534b80fac092b0c", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Jay Enterprises Liquid Silicone Rubber-LSR 140-1kg", "description": "out this item\nJay Enterprises LSR-140 is little harder than LSR-135 and it is mainly used for making molds for the Jewellery and food grade applications . It also can be used for making compontents and molds for concrete stone,GRC,polyurethane products ; wax, candle decoration ; rapid prototyping\nIts food & Jewellery grade Two-part silicon rubber: flowable addition cure silicon\nMedium Fast curing. Cures at room temperature within 5-8 hours.Degassing is required\nAn exceptional fluidity and good operability, easy to demold.\nGood tensile and tear strength, no shrinkage.", "price": 2000.0, "discountamount": 650.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "kg", "wax", "GRC", "item", "Cures", "stone", "molds", "concrete", "shrinkage", "5-8 hours", "Degassing", "compontents", "Good tensile", "tear strength", "Jewellery grade", "good operability", "room temperature", "rapid prototyping", "candle decoration", "Jay Enterprises LSR", "exceptional fluidity", "polyurethane products", "food grade applications", "Two-part silicon rubber", "Jay Enterprises Liquid Silicone Rubber-LSR", "flowable addition cure silicon Medium Fast curing" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 112, "imageuri": "https://productimages.withfloats.com/actual/655f26ec7940c2e6fde36b4d.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/655f26ec7940c2e6fde36b4d.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-11-23T10:18:13.692Z", "updatedon": "2023-11-23T10:18:13.692Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/jay-enterprises-liquid-silicone-rubber-lsr-140-1kg/112", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SILOZCEST", "category": "Jay Enterprises Liquid Silicone Rubber-LSR 140-1kg", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "655f26697516c10d308bb9ec", "fptag": "JAYENTERPRISESS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Jay Enterprises Liquid Silicone Rubber-LSR 115-1 kg", "description": "Jay Enterprises LSR-115 is mainly used for making molds of food grade applications like chocolate,candy products and life casting applications. It also can be used for making molds for concrete stone,GRC,polyurethane products ; wax, candle decoration ; rapid prototyping\nIts food Grade Two-part silicon rubber: flowable addition cure silicon\nMedium Fast curing. Cures at room temperature within 5-8 hours.\nAn exceptional fluidity and good operability, easy to demold.\nGood tensile and tear strength, no shrinkage.", "price": 2000.0, "discountamount": 650.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "wax", "GRC", "molds", "Cures", "shrinkage", "chocolate", "5-8 hours", "Good tensile", "tear strength", "candy products", "concrete stone", "good operability", "room temperature", "rapid prototyping", "candle decoration", "Medium Fast curing", "Jay Enterprises LSR", "exceptional fluidity", "polyurethane products", "food grade applications", "Two-part silicon rubber", "life casting applications", "flowable addition cure silicon", "Jay Enterprises Liquid Silicone Rubber-LSR" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 111, "imageuri": "https://productimages.withfloats.com/actual/655f2672634d9b997723caa0.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/655f2672634d9b997723caa0.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-11-23T10:16:09.785Z", "updatedon": "2023-11-23T10:16:09.785Z", "buyonlinelink": null, "producturl": "http://WWW.LIQUIDSILICONERUBBER.IN/meteriallist/jay-enterprises-liquid-silicone-rubber-lsr-115-1-kg/111", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SILOZCEST", "category": "Jay Enterprises Liquid Silicone Rubber-LSR 115-1 kg", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }